MTP ECM Carrier

building up my MTP collection now, should be getting some more at the weekend, but for now this is my ECM carrier that just arrived today:







two sewn on mini side pouches


interior of mini side pouches


still has the attachment points for a normal sidepouch however


the lid has thwo velcro openings for the antenna of the ECM depending on which way its put on the shelf


rear of the lid, note the 3 variable tension straps and the quick access port (the carrier was stuffed with an osprey vest just to give it some bulk before you ask what you see inside)


interior or carrier. main compartment has a draw-string closure



if you unzip these zips...


...this happens!


the shelf for the ECM, this can be raised and lowered as required and slides along the support frame. note that the black clips replace broken or missing clips, thats the only damage)


the support frame as mentioned above (sorry, ignore the foot)


these are on both sides, use unknown?


i believe a spare battery pocket?


on the inside of the elasticated lid theres this little pouch, again, use unknown?



spongey backing and contoured for air flow


sternum strap


waist strap


these D-rings are on every corner of the carrier, possibly for a daysack cover?


this made me chuckle...


Label


ECM carrier in use


thanks for looking

This is the older version.
The mesh on the current one is MTP too.
Well made packs,I have a brand new patrol pack in MTP and the 60mm mortar pack in DDPM.

Regards,
Andy

This might be a worthwhile glance Andy, i found it interesting:

http://www.scribd.com/mobile/documents/62370075/download?secret_password=17u90cx0jdtx8yuevezm

LOL!
Already have that and was trying to work out how to attach it here,without success!

Cheers,
Andy

Haha! No worries chap

Hi sobota
Could you let me know how many weight of this pack？i bought this from a e-bay seller，he didn't send the shipping invoice to me.

Cheers
sicong

I have aquired one of these today and I have to say it is a very well made bergen but setting it up is complicated becaus it has SO MANY STRAPS AND BUCKLES!!

Also sobata, does your bergan have the female part of the side compacting strap buckles on the front on a short strap and the opposite on the other side as mine does and it doesn't make much sense to me at all.
Hope I have not comfused you as much as I have comfused myselfe setting it up.

Also sobata on the 17 pic down there should have been 2 horizontol rubberized straps going from side to side to hold the ECM equipment in securly. When I have time I will post pictures of mine.

MTP wrote:I have aquired one of these today and I have to say it is a very well made bergen but setting it up is complicated becaus it has SO MANY STRAPS AND BUCKLES!!

Also sobata, does your bergan have the female part of the side compacting strap buckles on the front on a short strap and the opposite on the other side as mine does and it doesn't make much sense to me at all.
Hope I have not comfused you as much as I have comfused myselfe setting it up.

Erm... Haha! i think i know what you're talking about! and yes mine does have that, i think?